36
C
4: R
HAPTER
UNNING THE
S
W
ETUP
IZARD
3 If your ISP requires an assigned MAC address, select Yes, I would like to
enter a MAC address manually and enter the values for a MAC address if
required
(Figure
19). If the computer you are now using is the one that
was previously connected directly to the cable modem, choose Yes,
please clone the MAC address from the PC I'm currently using.
Static IP Mode
To setup the Router for use with a static IP address connection, use the
following procedure:
1 Select ISP has provided a static IP address, (see
Next.
Figure 20
displays.
Figure 20 Static IP Mode Screen
2 Enter your IP Address in the IP Address text box.
3 Enter your subnet mask in the Subnet Mask text box.
4 Enter your ISP Router address in the Internet (ISP) Gateway Address text
box.
5 Enter your primary DNS address in the Primary DNS Address text box.
6 Enter your secondary DNS address in the Secondary DNS Address text
box.
This step is optional. Not all ISPs require a secondary DNS address.
7 Check all of your settings, and then click Next.
Figure
16) and then click
Need help?
Do you have a question about the WL-537 and is the answer not in the manual?