Table of Contents
Advertisement
LCD Brightness
You can adjust the brightness of the LCD screen to compensate for
ambient lighting conditions.
1
Press the [MENU] button
[Control (Left/Right)] button
Settings
[Control (Up/Down)]
button
LCD Brightness
[Control (OK)] button.
2
Select the desired submenu and
menu item with the [Control
(Up/Down)] button, and then press
[Control (OK)] button.
3
Press the [MENU] button to exit
the menu.
Submenu Items
Items
Normal
Standard brightness.
Bright
Brightens the LCD screen.
•
If the surrounding is too bright, adjust the brightness of the LCD
screen.
•
Adjusting the LCD screen does not affect the image being recorded.
•
A brighter LCD screen consumes more power.
76
STBY
[220Min]
Settings
Date/Time Set
:
Date/Time Display
12
OFF
:
LCD Brightness
Exit
STBY
[220Min]
Settings
Date/Time Set
Normal
Date/Time Display
Bright
LCD Brightness
Exit
Exit
Use
Auto LCD Off
To reduce power consumption, the brightness of the LCD screen
is automatically dimmed if the camcorder is idle for more than 2
minutes.
1
Press the [MENU] button
[Control (Left/Right)] button
Settings
[Control (Up/Down)]
button
Auto LCD Off
[Control (OK)] button.
2
Select the desired submenu item
with the [Control (Up/Down)]
button, and then press the
[Control (OK)] button.
3
Press the [MENU] button to exit
the menu.
Submenu Items
Items
Off
To disable the function.
When the camcorder is idle for more than 2 minutes in the STBY
On
mode, or for more than 5 minutes when recording a video, the
power saving mode starts by dimming the LCD screen.
•
When the Auto LCD Off function is enabled, you can press any
button on the camcorder to return LCD brightness to normal.
•
Auto LCD Off will be disabled in the following case:
- If the power cable (Power adaptor, USB cable) is connected.
Other settings
STBY
[220Min]
Settings
:
Auto LCD Off
LCD
:
Beep Sound
:
Shutter Sound
Exit
STBY
[220Min]
Settings
Auto LCD Off
Off
LCD
Beep Sound
On
LCD
Shutter Sound
Exit
Exit
Use
Advertisement
Table of Contents
