Table of Contents
Advertisement
Getting started
INSERTING/EJECTING THE BATTERY
To insert the battery
Insert the battery into the battery slot until it softly clicks.
•
Make sure that the SAMSUNG logo on the battery is facing you
when the camcorder is placed as shown in the figure.
•
Use only Samsung-approved batteries. Do not use batteries from other manufacturers. Otherwise, there is a danger of overheating, fire or explosion.
•
Samsung is not responsible for the problems caused by unapproved batteries.
•
Remove the battery from the camcorder when the camcorder is not in use.
•
We recommend you purchase one or more additional batteries to allow continuous use of your camcorder.
To eject the battery
1
Gently push the [Battery release (BATT.)] switch in the direction
shown in the figure to eject the battery.
2
Push down, and then lift the battery out in the direction shown in
the figure.
[Battery release (BATT.)] switch
19
Advertisement
Table of Contents
