Advertisement
®
HGM - High Grade Magnet
Not all magnets of equal size ore equal in strength. HighiJmde (Y35), high-energy
magnets provide a high resistance to demagnetization and are over 20% stronger
per ounce than more common lower1jrade {Y25 or Y20) magnets. By utilizing
highiJrode magnets, efficiency rises to extraordinary levels resulting in on
astonishing� loud but yet controlled speaker.
@
FAY -Forged Alloy Yoke
One-piece cold forged l OOB alloy steel yokes initiate better magnetic transfer over
a more common 1wo-piece press fit design. Combine this with the reduced carbon
content found in l 008-alloy steel, this fearure allows for the greatest and
strongest rerenlion of magnetic fields generored by HGM.
®
CCAC - Copper Clad Aluminum Coil
Copper clod aluminum wire voice coils are very lightweight and have excellent
heat dissipation/capacity chamcteristics. Copper is coated over on aluminum
surface providing equal copper surface area at a fraction of the weight of solid
copper wire. CCAC's provide maximum sensitivity and extends the high frequency
response of speakers.
@
- Rolled Aluminum Former
RAF
Rolled aluminum voice coil formers are known for its superior thermal capabilities.
Its low moss and unrivalled thermal transfer characteristics make it the pertect
voice coil former that maintains exceptional dynamic response yet prevents voice
coil damage.
@
SWL -Symmetrical Woven Leads
Symmetrical woven ultm flexible braided tinsel leads move signal from the speaker
terminals
the voice coil. A woven tinsel lead prevents kinetic fuilures at
1o
connection points and occidental shorting. Placement of the terminals and weaving
the tinsel leads 180° apart provides even resistance on the voice c oil/cone
assembly. By providing on even resistance, the voice coil gap is reduced resulting
in greater sensitivity while voice coil rub is prevented.
@
PPT - Pushpin Terminals
High qualify nickel-plared and high-tension sprin1tlooded rermina� offer an oxide
free, low- resistance connection that will not cut off. Power from amplifiers will
travel to a speakers voice coil and will never be lost over a weak connection even
under the most severe conditions.
Advertisement
