Advertisement
Installing the Speakers
Your new Cerwin Vega Mobile series speakers were designed with the flexibility to be installed in multiple locations. However,
to ensure the best performance possible, it is important to isolate the front sound waves of the speaker from i1s rear sound
This is done by securely mounting the speaker to a flat surfuce known as a baffle. Make sure to seal the speaker to
waves.
ensure there ore no air leaks around its frame.
Selecting a Location
If your vehicle hos existing factory loartions, the easiest method would be to replace them with the exact some size speaker.
In the case where there is not a factory speaker location, there ore many places where the speakers will fit in o vehicle, but
they ore not always the best locations far good sound. Make sure to toke the time to select the best locations possible.
Mounting the speakers so that they
difficulties, please consult with your local authorized Cerwin-Vego Mobile dealer. They hove the to� and know-how to help
Door Mounting (if not using factory locations)
Prior to cutting, remove the panel from the door and check for clearance in the in the intended installation area, making sure
the window will go all the woy up and down without any interference. Avoid cutting any structural metal support or braces
mount the speakers.
Rear Deck Mounting
There ore
primary methods for mounting speakers in the rear deck of a vehicle, top and bottom mounting. Top mounting
two
requires dropping the speakers in through the deck (interior) while bottom mounting secures the speakers from underneath
(trunk). Either method requires o good seal around the frame for the best pedormance.
Running New Wiring
In most coses when mounting new speakers you will use the focrory supplied wiring, but if new wires hove
some precautions that need to be token. If the wire needs to run through metal, such as o door jamb, always
to prevent damage to your wires. Never run wire through bore metal! This can damage the source unit, amp, or even the
speakers themselves. Safety of the wiring against short circuits is THE MOST IMPO�ANT INSTALIATION CONCERN.
equal distance from your ears will achieve the best results. If you experience any
ore
10
be run there ore
10
a grommet
use
Advertisement
