Advertisement
CD
02.(ast Technology
02{ost Technology fine� runes their aluminum die cost boske1s microstrucrure.
Oxides are formed in the mold and virrual� eliminates gas porosity, cracks, and
segregation. This process increases basket strength while lowering basket
resonance. All this contributes to acoustics from the driver that is more defined
and acrurate.
@
LIS- Linear Rolled Spider
A symmetrical over11nder weave design and hybrid material blend provides the
perfect mix af exceptional strength and reliability. With LRS, music sounds good
at all volume settings and will remain controlled and very dynamic even at peak
volume levels.
@
CCD- Curvilinear Cone Design
Curvilinear shaped cones improve of 11Xis performance through their unique
geometry. The sensitive inner-section af the cone features a severe angle design
that aids in its aff11Xis performance. The outer edge is flat and more rigid
reproducing louder mid-bass frequencies that radiates uniform� throughout the
listening environment.
@
EMAR -Cone Design (Exponential Multi Annular Rib)
By exponentially increasing cone thickness and adding annular ribs to the outer
edge of the cone, EMAR applied cone design stifens the cone to decrease cone
resonance in the upper frequency bandwidth. Complex and unwonted vibrations
ore grea� reduced at high volume levels resulting in exponential� more mid-bass.
@
HCC - Hybrid Cone Construction
HCC technology combines three types of unique fibers (Kapok, Block Spruce, and
Unbleached Kraft) felted together under o specialized po�propylene cooling to
create o very exotic cone design. Unique traits engrained in these fibers such as
tubular shaping for more crosonal thickness, superior rigidity, lightness, and
lock of damaging chemical treatment ensures that this strong, ultra stif hybrid cone
emits a very naruml sound without sacrificing efficiency.
@
rcRS-Treated Cloth Ribbon Surround
Our special� formulated cloth ribbon surround is created through a 50 year old
process of weaving pure cotton in a plain weave mesh pattern, then solmted and
sealed with phenolic and various other c ompounds. By incorporating o mulliibbed
design to TCRS, a desired resonant frequency that is perfect for reproducing
extremely loud mid-boss is achieved.
Advertisement
