Error Messages - Samsung SH100 User Manual

Error messages

When the following error messages appear, try these remedies.
Error message Suggested remedies
•
Turn off your camera, and then turn it on
again.
•
Remove your memory card, and then insert
Card Error
it again.
•
Format your memory card.
The inserted memory card is not supported by
Card not
your camera. Insert a microSD or microSDHC
supported.
memory card.
•
The camera cannot connect to the network
using the selected access point. Select
another and try again.
Connection failed.
•
The camera fails to connect to the other
camera. Try connecting again.
File names do not match the DCF standard.
Transfer the files on the memory card to your
DCF Full Error
computer, and then format the card.
Delete the damaged file or contact a service
File Error
center.
Your camera does not support the FAT file
File system not
structure of the inserted memory card. Format
supported.
the memory card on the camera.
Error message
Initialization failed.
Invalid password.
Low Battery
Memory Full
No Image File
Photo transfer
failed.
Photo reception
failed.
134
Appendixes
Suggested remedies
•
Turn on AllShare enabled devices on the
network.
•
The camera has failed to locate an AllShare-
enabled device.
The password for transferring files to another
camera is wrong. Enter the correct password
again.
Insert a charged battery or recharge the battery.
Delete unnecessary files or insert a new memory
card.
Capture photos or insert a memory card that
contains some photos.
The camera has failed to receive a photo from
the sending camera. Ask the other person to
send the file again.
Network connection disconnected while
transferring photos. Try turning on the AllShare
feature again.