Troubleshooting - Princess 01.339600.01.001 Instruction Manual

Instruction manual
• Warning! The appliance contains a driven brush bar. This can
cause various hazards to people, animals and objects.
• Make sure the appliance is switched off before you open the
brush bar lock, remove or clean the brush bar.
• Unlock the brush bar lock - Disassemble the brush bar for
cleaning, remove any debris or hairs caught around the brush bar
and reassemble after all parts are completely dried.
• Never block the outlet openings during vacuuming.
• Never vacuum flammable liquids.
• Please pay attention to sharp objects such as glass to prevent
injury.
• Do not scrub the cotton filter or apply brute force to it.
• Please make sure that the cotton filter has been installed before
assembly.
• Do not continue to use when the cotton filter in the dust cup is
damaged.
10

TROUBLESHOOTING

Problem Possible reason
Power brush doesn't Power brush is
work. jammed by large
garbage (e.g.
packaging film) or hair
stuck in the brush.
Running time Battery is aged or
becomes shorter ambient temperature
is too high or too low.
Suction power Too much garbage in
becomes weak. the dirt container or
Cotton filter is
blocked.
Can't charge Ambient temperature
is too high or too low
Battery leaks The battery is not
used for a long time
Solution
Clear the garbage or
hair that is stuck in the
brush.
Contact your dealer to
purchase battery.
Use in an appropriate
environment.
Clean dirt container.
Wash the cotton filter.
Charge in an
appropriate
environment (5~40°C)
Replace battery