Connecting The Fm Antenna - Samsung HT-D5300 User Manual

5.1ch blu-ray home entertainment system

Hide thumbs Also See for HT-D5300:

User manual (91 pages)

Table of Contents

Wireless Network

You can connect the home theater to your network through a wireless IP sharer (router).

A wireless AP/IP router is required to make a wireless network connection. Connect the wireless

LAN adapter to the Wireless LAN Adapter on the rear panel of the product.

Set the network options. (See page 38)

Broadband

service

✎

NOTE



This product is compatible with only Samsung's Wireless LAN Adapter. (not supplied) (Model name:

WIS09ABGN).

- The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung Electronics retailer for

purchasing.



You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable

operation of the wireless network.)



Wireless LAN, by its nature, may cause interference, depending on the use condition (router

performance, distance, obstacles, interference by other radio devices, etc).



Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.



The home theater supports the following security protocols only:

Authentication Mode : WEP, WPAPSK, WPA2PSK

Encryption Type : WEP, AES



For the AllShare function, a PC must be connected in the network as shown in the ﬁ gure.

FM ANT

HT-D5300_XAA_1226.indd 27

Wireless IP sharer

Networking with PC for

AllShare function

(See page 69)