Pioneer PDP-427CMX Service Manual page 68

1
QUEST Command List
A
Command
The command QAP is for acquiring data on the model name from the main micro-computer management
QAP
The command QST is for acquiring data on the product status
QST
The command QS1 is for acquiring data on the various version information from the main micro-computer and module micro-computer management.
QS1
The command QS4 is for acquiring data on the input function, input signal information, screen size and destination information of the main screen.
QS4
The command QPI is for acquiring data on the integrator/PICTURE information.
QPI
The command QWB is for acquiring data on the integrator/WHITE BALANCE information.
QWB
The command QWS is for acquiring data on the integrator/SCREEN information.
QPS
The command QSS is for acquiring data on the Menu/integrator SETUP information.
QSS
The command QSO is for acquiring data on the Menu/integrator OPTION information.
QSO
The command QCI is for acquiring data on the time information from the main micro-computer management.
QCI
The command QSU is for acquiring data on the audio status.
QSU
The command QSI is for acquiring all data on input video signals.
QSI
The command QS2 is for acquiring data on the panel's operational information.
QS2
The command QIP is for acquiring data on operational information of the panel.
QIP
B
The command QAJ is for acquiring the panel's factory-preset data.
QAJ
QPW The command QPW is for acquiring the factory-preset data about the video of the panel.
QPM The command QPM is for acquiring the accumulated number of pulses of the panel.
The command QPD is for acquiring data from the 8 latest power-down (PD) logs.
QPD
The command QNG is for acquiring data on the history data (8 times) of the shut down information.
QNG
QSD The command QSD is for acquiring the data from the 8 latest shutdown (SD) logs.
[QAP] Response format
Order
1 STX
2 Echo back
C
3
Model name information
5
Check sum
6 ETX
[QST] Response format
Order
1 STX
2 Echo back
3 Generation information
4
Size information
5
Destination
D
6 Power supply state
7 At standby: standby factor
In electric conduction: Main-screen signal state
8
Sub-screen signal state
9 Main input function
10 Sub input function
11 Main screen size infromation
Two-screen display state
12
13 Functional lock information
14
Temperature information 1 (inside)
15 Temperature information 2 (outside air)
16 Temperature information 3 (SLOT)
Serial number
17
18
Dummy data 1
19 Dummy data 2
20 HOUR METER
E
21 Check sum
22 ETX
[QST] Size information
Size information
To acquired data on the MD microcomputer
(response) Resolution / size information
"3"
"4"
"5"
F
"6"
"∗"
68
1
2
Functional Description
Data Contents
Data Contents
"1"
"2"
"3"
"4"
"5"
"6"
"7"
Except the above
2
3
Length
Value
(BYTE)
1 0x02
3 "QAP"
PDP-427CMX-JP∗∗∗∗∗ 50 J (Japan)
PDP-427CMX∗∗∗∗∗∗∗∗
18 PDP-42MXE20∗∗∗∗∗∗∗
PDP-42MXE20-S∗∗∗∗∗
PDP-507CMX∗∗∗∗∗∗∗∗ 60
PDP-50MXE20∗∗∗∗∗∗∗
2 (CS)
1 0x03
Length
Value
(BYTE)
1 0x02
3 "QST"
1 "7"
1
Refer to following
1 "M"
1 Standby state/Energization state (refer to the following table)
1 At standby: standby factor (refer to the following table)
In electric conduction: Main-screen signal state (refer to the following table)
1 Sub-screen signal state (refer to the following table)
3 Input function of Main screen (refer to the following table)
3 Input function of Sub screen (refer to the following table)
1 Main screen size (refer to the following table)
1 Two-screen display state (refer to the following table)
1 Functional lock state (refer to the following table)
3 Main unit inside temperature (centigrade) (T2)
3 Outside air temperature (centigrade) (T3)
3 SLOT temperature (centigrade) (T5)
Serial number from the main micro computer
15
3 All "0"
2 All "∗"
5
Time data of the Hour Meter controlled by the Main microcomputer
If the time data of the Hour Meter are fewer than five digits, the higher-order
digits will be padded with zeros.
2 (CS)
1 0x03
[QST] Power supply state
Power supply state
Power supply state
(response)
"S" Standby state
"P" Energization state
PDP-427CMX
3
4
Command Effectiveness
Factory
A (North America)
G (European/General included CKD)
GS (European/General-Silver)
A (North America)
G (European/General)
4
Normal Operation