The Usb Connection Does Not Work Properly; The Printer Is Not Recognized Properly - Canon PIXMA iP1800 Series Quick Start Manual

Cause
The Setup CD-ROM is defective.
Installation procedure not followed
correctly.

The USB Connection Does Not Work Properly

The Printer Is Not Recognized Properly

Cause
USB hub is used.
USB expansion card is not installed
correctly.
USB driver is not installed correctly.
The Printer Is Not Recognized Properly
Cause
USB hub is used.
Click Start > My Computer, and confirm that CD-ROM icon
In non-XP Windows, double-click the My Computer icon on the desktop and
confirm that the CD-ROM icon
Confirm that the CD-ROM icon is displayed when you insert the CD-ROM.
If the CD-ROM icon is not displayed, restart your computer.
If the CD-ROM icon is still not displayed, try different disks and see if they are
displayed. If other disks are displayed, there is a problem with the Setup CD-
ROM. Contact a Canon service representative.
Follow the procedure described in the Easy Setup Instructions for proper
installation.
If the printer driver was not installed correctly, uninstall the driver, restart your
computer, and then reinstall the driver. Refer to the Printer Driver Guide on-
screen manual.
Note
If the installer was forced to be terminated due to a Windows error, the system
may be in an unstable condition and you may not be able to install the driver.
Restart your computer before reinstalling.
Connect the printer directly to the computer's USB port without going through
the hub.
Read the manual supplied with the USB expansion card and reinstall the card.
The computer does not recognize the printer properly. Reinstall the USB driver
using the latest version of the driver.
Connect the printer directly to the computer's USB port without going through
the hub.
Action
is visible in the window.
Action
Action
Troubleshooting
is visible.
43