Subscribe to Our Youtube Channel
Related Manuals for Total Source SLRM0005
Summary of Contents for Total Source SLRM0005
- Page 1 Original operating manual OPERATING MANUAL MANUAL STACKER S L R M 0 0 0 5 – S L R M 0 0 0 6 – S L R M 0 018 09/2021 – V01 from serial n° J20111395/01-04...
- Page 2 © 09-2021. TVH and TotalSource are registered trademarks. TVH Parts Holding NV, Brabantstraat 15, B-8790 Waregem. All rights reserved. ® ® No part of this publication may be reproduced or communicated in any form or by any means, electronic or mechanical, including copying, recording or use in an information storage or retrieval system, without prior and explicit permission of TVH Parts Holding NV.
- Page 3 Manuál vo vašom jazyku môžete nájst v priloženom vysvietenom riadku. Slovenian Ta priročnik najdete v svojem jeziku preko spodnje povezave. Swedish Du kan hitta denna manual på ditt språk via länken nedan. Turkish Bu kılavuzu aşağıdaki bağlantıdan kendi dilinizde bulabilirsiniz. www.tvh.com/SLRM0005-SLRM0006-SLRM0018_RV01 3/40...
- Page 4 Thank you for using our product. For your safety and to ensure a correct operation, we would like to bring to your attention some aspects of this manual: • This booklet supplies useful instructions for the correct operation and maintenance of the product.
-
Page 5: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ..................DESCRIPTION . -
Page 6: Introduction
INTRODUCTION This stacker is a manually operated stacker designed to lift and transport pallets on hard and even surfaces. It can lift open bottom or diagonal board pallets. Suitable ambient temperature is 5 °C up to 40 °C. We guarantee a long period of trouble free operation if the unit is operated and maintained correctly. -
Page 7: Description
DESCRIPTION 2.1. Technical data Always check the type plate for the correct information. Model SLRM0005 SLRM0006 SLRM0018 Load capacity (kg) 1000 1000 1000 Minimum height (H1) (mm) 2010 2060 1980 Maximum height (H4) (mm) 2010 3540 1980 Lifting height (H3) (mm) -
Page 8: Main Components Of The Product
2.2. Main components of the product Hydraulic stackers N° Component Tiller handle with operating lever Pump unit Foot pedal Steering wheels (with brakes) Fork wheels Forks Chain Foot brake Support handles 10 Safety net 11 Mast 8/40... -
Page 9: Placement Of The Decals
2.3. Placement of the decals The safety and warning labels should be placed as described in the pictures below. See chapter 3 for the explanation of the safety warnings. If the decals are damaged or missing, replace them. N° Decal Explanation Reference Brand decal 166TA2311 2.4. -
Page 10: Safety Instructions
SAFETY INSTRUCTIONS 3.1. Explanation of the safety decals If the decals are damaged or missing, please replace them. N° Decal Explanation Reference Operating instructions handle: 163TA1676 1. Handle up: lower the forks 2. Neutral: driving position 3. Handle down: pump up It is forbidden to carry or lift passengers. -
Page 11: Load Diagram
3.2. Load diagram N° Decal Reference Contact your dealer 3.3. General safety instructions • The operator should read all warning signs and instructions in the manual and on the stacker before using it. • Do not operate a stacker unless you have been trained or authorised to do so. •... - Page 12 TVH Parts Holding NV cannot envisage each possible circumstance that may result in danger. Therefore the warnings given in this publication and which appear on the equipment are not exhaustive. In the event that equipment, procedures, work methods or working techniques are used that are not specifically advised by the TVH company, it is necessary to make sure that there is no danger to the operator or other people.
-
Page 13: Transport And Storage
TRANSPORT AND STORAGE 4.1. Parking the stacker • Park the stacker securely in a dry and frost-free environment. • Do not park on an inclined surface. • Always completely lower the forks. • If the stacker is parked for longer than a month, lubricate the necessary parts, follow the instructions in chapter 7. -
Page 14: Assembly And Installation
Amount Reference Stacker complete SLRM0005 129TA8651 Stacker complete SLRM0006 129TA8652 Stacker complete SLRM0018 166TA4709 Operating manual 166TA8761 Spare parts list SLRM0005 166TA7659 Spare parts list SLRM0006 166TA7660 Spare parts list SLRM0018 166TA7862 Bleeder screw SLRM0005 164TA7833 Bleeder screw SLRM0006 164TA8008... -
Page 15: Operation
OPERATION 6.1. Safety instructions for operating the product • A damaged or malfunctioning machine must never be used. If damage or malfunctions are discovered during pre-operation inspection or function tests, the machine must be tagged and removed from service. • Make sure that no elements can hinder the lowering of the forks. •... -
Page 16: Operating Instructions
6.2. Operating instructions Please see chapter 7 for the daily maintenance schedule. Perform the daily maintenance check before operating the stacker. Hydraulic stackers 1. Positions of the operating lever: On the drawbar of the stacker, you can find the control handle which can be regulated in three positions: 1. - Page 17 5. Position the stacker in line with the storage space. 6. Move the goods into the storage space and safely unload the stacker. 7. Move the stacker backwards. 8. Lower the forks as much as possible. 9. If the job is finished, safely store the stacker (see chapter 4). If the forks of the stacker don’t lower or lift, see the following steps to adjust the lever.
- Page 18 3. Adjustments of the operating lever Adjustment of neutral position: 1. Place the operating lever in the normal position. 2. Push the tiller handle to the lowest position. 3. Regulate the adjusting nut and screw on the linkage so that, when the tiller handle is pumped, the forks neither raise nor lower.
- Page 19 Stackers with foot pedal The foot pedal is equipped with a quick lift function. This means that when the stacker is unloaded, you can use the foot pedal to quickly raise the forks or drum mechanism of the stacker. When the stacker is not in use fold up the foot pedal.
-
Page 20: Maintenance
MAINTENANCE 7.1. Safety instructions for the repair of the product • No modifications or alterations which could affect capacity, stability or safety requirements of the stacker but not limited to these examples, shall be made without the prior written approval of the original manufacturer, its authorised representative, or a successor thereof. - Page 21 Oil change Changing the oil can only be done by a qualified service technician and according to the manufacturer’s instructions. Draining the oil 1. Lower the forks to the bottom position. 2. Remove the bleeder screw and turn the stacker on its side. 3.
- Page 22 4. Brakes Check whether the brakes function properly by following below steps: 1. Press the foot pedal down to lock the brake. 2. Push the stacker, the stacker should not move. 3. Pull the foot pedal up to release the brake. 4.
-
Page 23: Troubleshooting
TROUBLESHOOTING N° Problem Cause Action The forks can’t be The level of hydraulic oil is too low Add hydraulic oil, see chapter 7 raised up to the maximum height The forks can’t be The level of hydraulic oil is too low Add hydraulic oil, see chapter 7 raised The oil contains impurities... -
Page 24: Final Decommissioning And Disposal
FINAL DECOMMISSIONING AND DISPOSAL Final, proper decommissioning or disposal of the product must be performed in accordance with the regulations of the country in which the product is used. In particular, regulations governing the disposal of batteries, fuels and electronic and electrical systems must be observed. -
Page 25: Annexes
Merk / Marque / Brand / Marke / Marca TotalSource Type / Typ / Tipo SLRM0005 / SLRM0006 / SLRM0018 Model/ Modèle/ Modell/ Modelo ● dat het zelf het TECHNISCH DOSSIER samenstelt; qu’il constitue le DOSSIER TECHNIQUE en personne;... - Page 26 ORIGINAL DECLARATION that the manual stacker fulfills all the relevant provisions of the directives and harmonized standards stated herein below; dass Manueller stapler allen einschlägigen Bestimmungen der nachstehenden Richtlinien und harmonisierten Normen entspricht; que la apilador manuel cumple todas las disposiciones aplicables de las Directivas y normas armonizadas citadas abajo;...
-
Page 27: 10.2. Hydraulic Diagram
10.2. Hydraulic diagram Neutral Lowering Lifting 10.3. Spare parts list The spare parts list is delivered together with this manual in the package. If it wasn’t included in your package, check the packing list in chapter 5 to order a new spare parts list. 27/40... - Page 28 Your distributor: Manufactured outside the EU for: TVH PARTS HOLDING NV Brabantstraat 15 • 8790 Waregem • Belgium T +32 56 43 42 11 • F +32 56 43 44 88 • info@tvh.com • www.tvh.com...
Need help?
Do you have a question about the SLRM0005 and is the answer not in the manual?
Questions and answers