Samsung SCH-R360 User Manual page 40

– 2-Sec Pause — A 2-second pause after which dialing resumes (For
more information, refer to "Add Pauses to Contacts Numbers"
on page 37).
Select the desired option.
When you're finished changing the contents of a field,
5.
press SAVE ( ). Your changes are saved and a
confirmation message appears in the display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
Wait — Stops the calling sequence until the phone receives further
•
input.
2-Sec Pause — Stops the calling sequence for two seconds, then
•
sends the remaining digits.
Note: You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
To add pauses to a Contacts entry number, do the following:
Find the Contacts entry associated with the number you
1.
want to include one or more pauses. (For more
37
information, refer to "Finding a Contacts Entry" on
page 34.)
Select and edit the desired number. (For more information,
2.
refer to "Editing a Contacts Entry" on page 36.)
Press Options. The following pause options appear in the
3.
display:
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
Select the desired pause to add it to the number sequence.
4.
When you're finished entering information, press SAVE
5.
( ) to store the number to Contacts.
Pause Dial from Contacts
If you stored the number using 2-second pause(s), simply
1.
recall the number from Contacts.
If you stored the number using Wait(s), recall the number
2.
from Contacts and wait for the appropriate prompt from
the dialed number.
Press to dial the number.
3.