Finding A Contacts Entry - Samsung SCH-R360 User Manual

• Memory Info — Display used and available memory for Contacts
entries.

Finding a Contacts Entry

Voice Method
Use the Voice SVC Lookup command to view contact information
for any named contact stored in your Contacts list by saying the
name.
Note: The Lookup command shows the requested contact information in the
display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
In Standby mode, press and hold
1.
"Say a Command" appears in the display and is
pronounced through the speaker.
Say "Lookup" followed by the full name of the person you
2.
want to call, exactly as it is entered in your Contacts list.
• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with "Did you say?" followed by the first name on the list.
to launch Voice SVC.
Say "Yes" to confirm the name or "No" to hear the next
3.
name, or use the keypad to select the correct name from
the list. (For more information, refer to "Voice SVC" on
page 76.)
• To say the name again, press Repeat .
• To exit VoiceSignal without dialing, press
The contact information for the name you selected appears
4.
in the display.
• To dial the number associated with the name, press
• To erase this entry from your Contacts list, press Erase .
• To add or change information for this entry, press EDIT .
• For more options, press Options. The following options pop-up in
the display:
– Send Txt Msg
– Send Pic Msg
– Call
– Send Name Card Via Bluetooth
.
.
Understanding Your Contacts 34