Table of Contents
Advertisement
Taking Measurement
unnecessary noise.
Measurement Method C
"left hand-right hand" (approximately corresponds to "lead 1")
1. Press the power button for 3 seconds to turn on your ECG Pen.
2. Place your right index finger on the two top electrodes of the device.
Place a finger of your left hand on the lower electrode.
3. Press the lower electrode until you hear or feel a click.
Press it GENTLY until you hear the click sound.
Note: Do not press the electrodes hardly. Excessive muscle tension will cause
unnecessary noise.
Note: Please note that there must be no skin contact between your right and
left hand (measurement method C) or hand and chest (measurement
methods A/B). Otherwise, the measurement cannot be taken correctly. Do
Taking Measurement
not move during the measurement, do not speak and hold the device still.
Movements of any kind will falsify the measurements.
Advertisement
Table of Contents
