Troubleshooting - Zeegma Sap User Manual

Once the operation is finished, unplug the appliance.
Tips:
• When extracting the leaf juice (e.g. spinach), the product may be louder, it
is natural.
• The quality and looks of the juice depends on how fresh fruits and vegetables
are.
• Some fruits and vegetables may leave more pulp in the juice than others. If
necessary, filter such juice before you drink it.
• Carrot juice may contain less water and more deposits.
• If you put too many ingredients into the juicer, the tank may clog.
• If you can notice that the tank is clogged and juice does not come out –
remove some ingredients.
• If you prepare juice of several different ingredients, change the order of
ingredients added.
• If one of the ingredients are leaves, place them into the product along with
other fruit to increase squeezing efficiency.
• Be careful when squeezing hard fruits and vegetables (e.g. carrots). The
appliance is likely to overheat quicker.

Troubleshooting

Problem
The juicer does not work
Check
Has the feeder cable
been plugged in?
Has the juicer been
assembled properly?
Has the ON switch been
set properly?
Has the appliance been
used for more than 20
minutes?
Solution
Check if the feeder
cable is connected to the
socket 220-240 V
~ 50-60 Hz.
Assemble the product
in accordance with the
manual.
To switch the appliance
on, slide the switch into
„STA".
Switch the product off.
Wait for a while and start
it again. If you want to
use the appliance for
another period of 20
minutes, the product
needs to cool down for
one hour.
EN