Zeegma Sap User Manual page 8

• Boiled soya pulp may be more diffi cult to remove than other pulps.
EN
• Some fruits and vegetables may leave traces of pulp in the juice.
• In case of any doubts, follow the instructi ons.
1. Check all components of the set.
Make sure they have been assembled
in accordance with the manual.
2. Place the tank under the pulp and
juice outlets.
3. Lift the non-drip plug at the juice
outlet.
4. Plug the product in.
Put ingredients into the juicer slowly.
If necessary, use a pushrod.
To switch the appliance on, slide the
switch into „STA.
If ingredients get stuck in the tank, slide
the switch into „REV" for a few seconds.
By doing so, you acti vate reverse rotati on.
Aft er a while return to original model: slide
the switch into „STA".
To stop the squeezing process, slide the
switch into „O".
If pulp does not come out, stop the appliance
and clean it with a brush supplied.