How To Assemble The Appliance - Zeegma Sap User Manual

How to assemble the appliance

Assemble the appliance on a flat and stable surface. The appliance must not be
plugged in when you assemble it.
1. Place a rubber gasket in the pulp outlet (correct inlet marked with line).
2. If you have difficulty with inserting the valve, you can wet it with a little
amount of water.
Pulp outlet
Note!
Before every use, make sure the rubber valve has been fixed properly.
3. Place the tank on metal groove which stands out of the juicer base.
Make sure the tank has been fixed on the groove properly
(push until it resists)
Rubber gasket
(not fixed)
Tank
Metal groove
Juicer base
Rubber gasket
(fixed properly)
Pulp outlet
EN