Panasonic EP1285KL Operating Instructions Manual page 9

Household massage lounger
Hide thumbs Also See for EP1285KL:
Table of Contents

Advertisement

3 HOW TO MOVE THE UNIT
Using the wheels to move the unit
Grasp the legrest to move the unit when using the wheels.
It is easier to move the unit with the massage heads
retracted and the backrest in the upright position.
* Place a mat or cloth on the floor and move the unit slowly
to prevent floor damage.
Move it slowly
Legrest
Wheels
4 INSTALL THE ARMRESTS ON THE UNIT
Left
Front
Velcro
Convex
Front
Allen key
Back
Zipper
Round hole
Rear
Lift up
Secure with screws
Lifting the Unit
Move the unit by having one person hold the legrest and
another person use the handles on the back.
* Please hold the handles and legrest securely to avoid
dropping the unit as it may damage your floor.
1
Install the armrests.
(Be careful to avoid damaging the coated fabric.)
1 Unfasten the velcro.
2 Unfasten the zipper of the armrest completely.
3 Check the side (right or left) of the armrest. Check
the direction (front or back) of the armrest as well.
The illustration shows the left armrest. The right armrest
is stamped "Front", "Right" and "Back".
* The left armrest must be installed on the left hand side of
the unit.
4 Align the convex portion of the armrest with the
round hole on the unit, and embed the armrest on
the unit. Avoid catching the coated fabric between
them.
If it is caught, pull it out without damaging the fabric.
2
Secure the armrests with attachment
screws.
(Total of 4 positions for a single armrest)
Lift the coated fabric on the side of the armrest and
insert the attachment screw onto the end of the Allen
key, and then tighten.
(Tighten the screws in the 4 positions lightly at first, and
then tighten all screws firmly.)
* If the screw does not enter into the hole, tighten the screw
by pushing the armrest from the top.
3
Close the zipper at the bottom side of
the armrests.
When closing the zipper, be careful not to twist the end of
the zipper.
1 Set the zipper.
2 Fasten the zipper.
4
Put both ends of the zipper into the
inside.
1 Turn in the edge of the zipper.
2 Fix the sliding tab of the zipper with the velcro.
Place your
fingers inside
the handle
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ep1285tlEp1285

Table of Contents