Page 1
TRADE QUALITY SINCE 1995 INDUSTRIAL 750MM WALL FAN MODEL FA-23150 Instruction User Manual & Warranty CAUTION: Read the Assembly & Safety Instructions before operating and retain for future reference...
Thank you & Congratulations on the purchase of your Dynabreeze Industrial 750mm Wall Fan To find out more information on this product, please visit www.dynabreeze.com.au or contact: Tradeware Address 45 Birralee Rd, Regency Park SA 5010 Phone 1300 658 494...
Page 3
OPERATION CONDITIONS & SAFETY PRECAUTIONS When using electrical appliances, basic safety precautions should be WARNING: followed to reduce the risk of fire, electric shock and injury to persons or property. • To avoid a hazard due to instability of the •...
PARTS IDENTIFICATION A Front Grille B Fan Blade C Blade Screw D Grille Locking Screw (& Nut) E Rear Grill F Rear Grille Locking Screws x 4 G On/Off/Speed Control Dial H Oscillation Arm I Oscillation Nut J Power Cord K Motor Head L Motor Neck M Tilt Adjustment...
ASSEMBLY & OPERATION Tools required Adjustable Shifter Multigrips Drill Assembling the fan The fan must be mounted vertically. Fan Body & Motor NOTE: 4. Put the wall mount plate against the wall 1. Locate the bag that contains the wall and drill holes to fix the wall mount in place.
Page 6
Assembling the fan cont. 6. Ensure the holes in the wall mount and 9. Insert the hex bolt back in, ensuring the support arm align and using an adjustable head is inserted on the side of the hex bolt shifter, tighten with the provided hex bolts cut out hole.
Page 7
Assembling the fan Blade & Grilles 3. Remove the plastic cover from the motor shaft to insert the fan blade. Align the 1. Use the shifter to unscrew the 4 rear blade screw on the fan blade, to the flat grille locking screws, spring washers and area on the motor shaft.
Page 8
Operating the Fan Adjustments: Vertical Tilt Adjustment Turn on the fan by turning the speed control dial from 0 to 1, 2 or 3. Grip the top and bottom of the grille firmly and tilt to the desired position. Oscillate The fan is set to oscillate by default.
Tradeware offers a 3 Year Warranty. The additional warranties, terms and conditions are outlined on the website www.dynabreeze.com.au under the Support tab. Under Support you can also Register your product upon purchase and enjoy the peace of mind of knowing your product is registered should anything happen.
Page 11
Notes INSTRUCTION USER MANUAL & WARRANTY 11...
Page 12
Tradeware 45 Birralee Road, Regency Park South Australia 5010 info@tradeware.com.au 1300 658 494 www.tradeware.com.au Due to continual product development, please note the information and content Please Recycle provided may not be final and may be subject to changes.
Need help?
Do you have a question about the FA-23150 and is the answer not in the manual?
Questions and answers