Samsung WF-F125AV Service Manual page 60

14. REFERENCE INFORMATION
No. Type Part
DRUM
50 rinsing related Rinse being not put in tub
WASHER
DRUM
51 rinsing related Bubble being remained
WASHER
DRUM
52 water drain related Water being not drained
WASHER
DRUM Dehydrating time being increased
53 dehydrating related
WASHER again
DRUM Washer being worked for four hours
54 dehydrating related
WASHER without stopping
DRUM Not dehydrating with the motor being
55 dehydrating related
WASHER purring after water is drained
DRUM Being stopped with thuds during
56 dehydrating related
WASHER dehydration
DRUM
57 dehydrating related Not being squeezed well
WASHER
DRUM
58 dehydrating related Water being in at purchasing
WASHER
DRUM
59 dehydrating related Dehydration being not worked at all
WASHER
DRUM Action for water being freezen
60 others
WASHER in winter
DRUM being clogged/foreign
61 others
WASHER materials
DRUM installation / Consulting for installation of
62
WASHER connection front loading washing machine
DRUM installation /
63 Level check
WASHER connection
DRUM installation /
64 Removal/house moving reinstallation
WASHER connection
DRUM
65 washing related Slow speed of washing rotation
WASHER
DRUM
66 washing related Clothes being damaged
WASHER
14-8
Solut ion
Situation
method
General
consulting
General
consulting
General
consulting
..Make a comment for the customer to
General prepare the memorandum since he can
consulting not be famaliar with the contents
completely.
Specifi c
consulting
General
consulting
..Make a comment for the customer to
AS rerecomm prepare the memorandum since he can
ended not be famaliar with the contents
completely.
General
consulting
AS rerecomm
ended
General
consulting
AS rerecomm
ended
General
consulting
General
consulting
Specifi c
consulting
Specifi c
consulting
General
consulting
General
consulting
Before consu lting
It may appear when the rinse agent remains to
clog.
It may appear when there is too much or too little
laundry.
The vibration and noise occur when the horizon
is broken or the laundry are leaned to one
direction. So It may appear when the safety
device is operating to prevent it.
If the washing machine consumes hours more
than necessary check whether the water supply
is too small. And note that that the boling and the
drying course takes much time.
The power cord for motor may be cut or the gear
shaft hardened.
It may appear when the horizon is broken or
there are too much clothes to wash.
It may appear when there are clothes like vinyl.
It may appear when the interior components do
not work properly.
It may appear when there is too much laundry.
Check whether there is foreign material inside
(coin nail and other sharp material) and so it may
appear due to the zipper or button of jeans.
cause
Did the rinse agent drain immediately or part to put the rinse is
clogged after putting the rinse agent?
The rinse agent does not drain only when putting it up
to the reamer shaped cap which is in the box of rinse agent. If
clogged take out the cap and
If there is too much laundry or vinyl clothes the detergent is not
solved. Reduce the laundry or take out the vinyl clothes separately.
In this case you are recommended our engineer's inspection.
If there is too little laundry less than 1KG or the clothes in the
washing tub are severely entangled it appears.
Check whether the water supply time is too much delayed due
to the low pressure of water or boiling or drying is selected. In other
cases request an engineer's inspection.
In this case you are recommended our engineer's inspection.
check the level of a washing machine.
Check whether the vinyl clothes are attached on to the washing
tub so as to prevent the immediate the outgoing of the moisture to the
outside. Otherwise request an engineer's inspection.
There may be remaining water since the products is delivered
thorugh the fi nal products test. It is normal and you can use it without
fear.
In this case you are recommended our engineer's inspection.
pour the warm water on to the tap to take out the water suppy
hose and put the hose in to the water of approximately 50 degree.
And then pour the water in to the washing box to check whether the
drain is well done.
After loosening the water supply hose and check the inlet of water
supply whether there is foreign material inserted such a soil dust.
The drum washing machine is leveled after removing the safety
device at the rear of drum. And for a removing the safety device refer
to accessories and user's manual.
Level it by use of a leveller(with a coin weight) at the front.
It is possible to remove and install in the house but when moving
to the other house and installing it assemble the safety device at the
back while moving and remove it after moving. If the drum is shaken
during the moving it causes a serious damage.
Check whether the laundry is input over the proper amount.
Otherwise request an engineer's inspection.
Check whether there is foreign material in the washing tub. In case
of dehydrating the weak material cothes it shall be inserted in the net
during dehydrating. Any other cleaning agent (decoloration agent)
shall not be used except the detergent and rins
Management