Table of Contents
Advertisement
6 Service Mode
1. Indication method of the service menu
Set the mode switch "Recording" mode.
2. While the power is turned OFF, keep pressing the "Power" button, "Zoom lever" to W side and "intelligent auto/Manual" button
for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
Service mode menu
Screen display
1
3
4
5
10
12
14
15
NOTE:
Do not using service mode except above table of Service mode menu.
3. End method of the top screen of the service mode menu
Press the [ MENU ] button to end the service mode, and then POWER OFF.
Contents
Factory settings
Built-in memory self check execution
(HC-V210M only)
Lock search history indication
Power ON self check result display
Erasing the lock histories
Camera data indications while the
video playback
Adjutment function for the service
Restore the backed up adjustment data Restore the adjustment data to new or repaired Main P.C.B.
Function
Function to throw a product up in a factory shipment state
(When recorded data in Built-in memory, "error display" is done)
Function to check self as for the state of Built-in memory
Display the camera system error cord for three histories saved
in EEPROM
Power ON self check (function to diagnose correct function of
the device and interface between devices) result display
Erasing the error histories (working time is not erased)
Display the camera informations (Shutter speed, Iris value,
White balance and focal length) while playing recorded video
The service adjustment do setup and adjustment of the follow-
ing items required in the field service.
from SD card that the data backed up from original Main P.C.B.
before repairs or replacement.
26
Advertisement
Table of Contents
