Figure D-7 Gnc - Vor/Ils Interconnect - Garmin GTR 225 Installation Manual

NOTES
1 ALL WIRES 24 AWG OR LARGER UNLESS OTHERWISE SPECIFIED.
2
GROUND DESIGNATIONS:
AT THE GNC, CONNECT SHIELD GROUNDS TO THE CONNECTOR BACKSHELL - THE SHIELD TERMINATION
3
LEADS SHOULD BE LESS THAN 3.0". CONNECT OTHER END OF THE SHIELD PER THE REMOTE EQUIPMENT
INSTALLATION REQUIREMENTS.
REFER TO MANUFACTURER'S DOCUMENTATION FOR COMPLETE PINOUT AND INTERCONNECT
4
INFORMATION. PINOUTS OF OTHER UNITS SHOWN FOR REFERENCE ONLY.
190-01182-02
Rev. F
SHIELD BLOCK GROUND
S

Figure D-7 GNC - VOR/ILS Interconnect

Sheet 2 of 2
AIRFRAME GROUND
GTR 225/GNC 255 TSO Installation Manual
Page D-14