OST RuggedNet 10GPoEBT/Si User Manual

OST RuggedNet 10GPoEBT/Si User Manual

Unmanaged 6 port 60/100w ieee 802.3bt 10gigabit switches

Advertisement

Quick Links

RuggedNet
®
Unmanaged 6 Port
60/100W IEEE 802.3bt 10Gigabit Switches
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
10GPoEBT/Si
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights
reserved. The whole or any part of this publication may not be reproduced, stored
in a retrieval system, translated, transcribed, or transmitted, in any form, or by
any means, manual, electric, electronic, electromagnetic, mechanical, chemical,
optical or otherwise, without prior explicit written permission of Omnitron Systems
Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.:
FlexPoint
, FlexSwitch
, iConverter
TM
TM
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
the Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This product is warranted to the original purchaser (Buyer) against defects in
material and workmanship for a period of two (2) years from the date of shipment.
A five (5) year warranty may be obtained by the original purchaser by registering
this product at www.omnitron-systems.com/support within ninety (90) days from the
date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a
product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility,
at Buyer's expense. Omnitron will pay the shipping charge to return the product
to Buyer's designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-
supplied equipment, Buyer-supplied interfacing, unauthorized modifications or
tampering with equipment (including removal of equipment cover by personnel not
specifically authorized and certified by Omnitron), or misuse, or operating outside
the environmental specification of the product (including but not limited to voltage,
ambient temperature, radiation, unusual dust, etc.), or improper site preparation
or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal theory.
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
Page 2
,
®
and
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RuggedNet 10GPoEBT/Si and is the answer not in the manual?

Questions and answers

Summary of Contents for OST RuggedNet 10GPoEBT/Si

  • Page 1 , OmniLight ® ® ® OmniConverter , RuggedNet , Omnitron Systems Technology, Inc. , OST ® ® the Omnitron logo. Unmanaged 6 Port All other company or product names may be trademarks of their respective owners. 60/100W IEEE 802.3bt 10Gigabit Switches The information contained in this publication is subject to change without notice.
  • Page 2: Product Overview

    Directive) of the European Community directive 2012/19/EU on waste electrical and electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/ The RuggedNet 10GPoEBT/Si is a industrial High-Power PoE Ethernet switch that EU, for electrical and electronic equipment sold in the EU after July 2019. Such...
  • Page 3: Installation Procedure

    The table below provides a description of each DIP-switch position and function. Switch Position Legend Function LEFT Single Switch RIGHT Dual Switch Mode of Operation LEFT Switch RIGHT Directed Switch LEFT RIGHT Link Protection Uplink Redundancy LEFT No Return Front Panel Layout RIGHT F1 Return Reset Button...
  • Page 4 to uplink port F2. This prevents broadcast traffic from flooding other network ports. Incoming traffic from F1 and F2 follows MAC address mapping. Directed Switch Mode Dual Uplink Port When configured for Directed Switch Mode and Uplink Redundancy (per DIP- switches 3 and 4), traffic is forwarded to both the primary and secondary uplink Dual Device with Directed Switch Mode ports.
  • Page 5: Installing The Module

    SW5: MAC Learning - “MAC Learning/Off” 2) Installing the Module When this DIP-switch is in the LEFT “MAC Learning” position (factory default), all The module can be wall or rack mounted using the optional Wall Mount Plate ports on the module will learn the source MAC address of each received packet and (8260-3).
  • Page 6: Connect Cables

    WARNING REGARDING EARTHING GROUND: This equipment shall be connected to the DC supply system earthing electrode conductor or to a bonding jumper from an earthing terminal bar or bus to which the DC supply system earthing electrode is connected. This equipment shall be located in the same immediate area (such as adjacent cabinets) as any other equipment Power Options that has a connection between the earthed conductor of...
  • Page 7: Verify Operation

    100W RJ-45 User Ports Description IEEE 802.3af IEEE 802.3at IEEE 802.3.bt IEEE 802.3bt LED Indicators PoE+ PoE (Type 3) PoE (Type 4) Legend Indicator Description Power Supply Voltage 46.0 to 57.0 VDC 51.0 to 57.0 VDC 51.0 to 57.0 VDC 53.0 to 57.0 VDC No link Range Green - ON...
  • Page 8: Customer Support Information

    Customer Support Information RuggedNet ® GHPoEBT/Si (60/100W BT) Description 10/100/1000BASE-T with Gigabit Fiber or Copper Uplinks If you encounter problems while installing this product, contact Omnitron Technical Ruggedized Unmanaged IEEE 802.3bt PoE Ethernet Switch Support: IEEE 802.3, IEEE 802.3af (15.40 watts max), Phone: (949) 250-6510 Standard Compliances...

Table of Contents