OST OmniConverter 10GMG/Sx User Manual

OST OmniConverter 10GMG/Sx User Manual

Unmanaged multi-gigabit/multi-rate 10gigabit ethernet switch

Advertisement

OmniConverter
Unmanaged Multi-Gigabit/Multi-Rate
10Gigabit Ethernet Switch
User Manual
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
10GMG/Sx
®
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights
reserved. The whole or any part of this publication may not be reproduced, stored
in a retrieval system, translated, transcribed, or transmitted, in any form, or by
any means, manual, electric, electronic, electromagnetic, mechanical, chemical,
optical or otherwise, without prior explicit written permission of Omnitron Systems
Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.:
FlexPoint
, FlexSwitch
, iConverter
TM
TM
OmniConverter
, RuggedNet
, Omnitron Systems Technology, Inc.
®
®
the Omnitron logo.
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice.
Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.
Warranty
This network product and the included AC/DC power adapter are warranted to the
original purchaser (Buyer) against defects in material and workmanship for a period
of two (2) years from the date of shipment. The warranty for the network product
(excluding the AC/DC power adapter) can be extended to five (5) years by registering
the product at www.omnitron-systems.com/support within ninety (90) days from the
date of shipment. During the warranty period, Omnitron will, at its option, repair or
replace a product which is proven to be defective with the same product or with a
product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility,
at Buyer's expense. Omnitron will pay the shipping charge to return the product
to Buyer's designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to product malfunctions resulting from
improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-
supplied equipment, Buyer-supplied interfacing, unauthorized modifications or
tampering with equipment (including removal of equipment cover by personnel not
specifically authorized and certified by Omnitron), or misuse, or operating outside
the environmental specification of the product (including but not limited to voltage,
ambient temperature, radiation, unusual dust, etc.), or improper site preparation
or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any legal theory.
, miConverter
, NetOutlook
, OmniLight
®
TM
®
, OST
TM
Page 2
,
®
and
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OmniConverter 10GMG/Sx and is the answer not in the manual?

Questions and answers

Summary of Contents for OST OmniConverter 10GMG/Sx

  • Page 1 , NetOutlook , OmniLight ® ® ® OmniConverter , RuggedNet , Omnitron Systems Technology, Inc. , OST ® ® the Omnitron logo. All other company or product names may be trademarks of their respective owners. OmniConverter 10GMG/Sx ® The information contained in this publication is subject to change without notice.
  • Page 2: Product Overview

    Directive) of the European Community directive 2012/19/EU on waste electrical and electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/ The OmniConverter 10GMG/Sx are unmanaged multi-gigabit Ethernet switches EU, for electrical and electronic equipment sold in the EU after July 2019. Such...
  • Page 3: Switch Mode

    1) Configure DIP-switches DIP-switches are located on the side of the module. The DIP-switches are used to configure modes of operation and networking features. SW2, SW3, SW4 and SW5: Reserved The table below provides a description of each DIP-switch position and function. These DIP-switches must be left in the DOWN “Off”...
  • Page 4 2) Installing the Module DC Power Wall Mounting This module is intended for installation in restricted access areas. (“Les matériels sont destinés à être installés dans des EMPLACEMENTS À ACCÈS RESTREINT”). The wall mounting height of the module should be less than or equal to 2 meters A restricted access area can be accessed only through the use of a special key, or (6.6 feet) from the floor.
  • Page 5: Verify Operation

    4) Verify Operation Verify the module is operational by viewing the LED indicators. Power LED Indicators Legend Indicator Description Unit not powered WARNING: The positive lead of the power source must be connected to the Green - ON Unit powered “+”...
  • Page 6: Specifications

    Specifications Safety: UL 62368-1, UL 60950-1, IEC 62368-1, OmniConverter ® 10GMG/Sx IEC 60950-1, Description Unmanaged 10Gigabit Multi-Gigabit/Multi-Rate Ethernet Switch EN 62368-1, EN 60950-1, Standard Compliances IEEE 802.3, 802.3bz, CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1, Environmental REACH, RoHS and WEEE CE Mark, UKCA Frame Size Up to 10,240 bytes...

Table of Contents