Advertisement
3-Zone Automatic Climate Control
Press any button or turn the temperature dial to activate the system.
1.
AUTO
Your climate control system will help the cabin maintain your selected temperature by regulating the temperature,
fan speed and airflow.
•
When AUTO is selected, the system will come on automatically to condition and dehumidify the cabin's interior.
Synchronize Zones
Pressing the AUTO button for two seconds will synchronize the driver and passenger controls to the same temperature,
fan speed and airflow.
2.
HI/LO
When HI or LO are selected as the desired temperature, the system will run continuously, heating or cooling with the
blower in AUTO mode.
3.
Seat Heating
Pressing the
button switches the seat heating on at the highest setting (level 3). The LEDs indicate the temperature
level. To reduce the temperature, press the button again. To switch the seat heating off, press the button repeatedly
until the LED turns off.
3
1
4. Air Distribution
Direct airflow to defrost, panel and floor vents or a combination by selecting the appropriate airflow button
or buttons.
5. Defrost
The windshield and side windows are cleared of frost or condensation as quickly as possible. Press the button to
turn this feature on or off.
6.
Recirculation
The recirculation function helps prevent outside air and odors from entering the cabin. It may also be used in
conjunction with A/C to cool the cabin more quickly. Do not leave the system in recirculation mode for an extended
period of time.
7.
Rear Defogger
The rear window can be cleared of condensation for better visibility by pressing this button. It will automatically turn
off after 10 to 20 minutes depending on outside temperature.
8.
Turning the Climate Control System Off
Press the Fan button to turn the system off.
Warnings: Climate Control System
See Climate Control System in your Owner's Manual for more detailed information and for important safety warnings.
3-Zone Automatic Climate Control
2
5
6
7
2
8
4
3
Advertisement
