Human Touch perfect chair pc6 Use & Care Manual page 6

take a seat
USING THE ERGO LUMBAR PILLOW
Your Perfect Chair comes with a unique ergo lumbar pillow for use anywhere you need extra support, and is
easily formed to match your body's contours.
Using the pillow as a head pillow
1. If the head pillow is installed, remove it and attach
the ergo lumbar pillow straps to the head pad using
the hook and loop fasteners.
2. Adjust the pillow thickness for maximum comfort
(see Adjusting Pillow Thickness on the next page).
Using the pillow for lumbar support
1. Attach the pillow straps to the pillow using the
built-in hook and loop fasteners.
2. Tuck the pillow behind the lower lumbar curve
in your back.
3. Adjust the pillow thickness for maximum
comfort (see Adjusting Pillow Thickness on
the following page).
humantouch.com
10
Adjusting pillow thickness
1. To compress the body pad thickness, push the ball
valve while leaning back against the backrest. When
the pad reaches the desired thickness, release
the valve.
2. To reinflate the body pad, push the ball valve without
applying any pressure to the pad. When the
pad reaches the desired thickness, release the
valve. It takes approximately ten seconds for the
pad to reach its full thickness.
PILLOW PERFORMANCE NOTES
• You must remove all body weight from the pillow when reinflating it.
• If the pillow has been compressed for a long period of time, it may take up to one minute to restore it to its
full thickness.
• The colder the pillow is, the longer it takes to react to form changes.
• Should the ball valve leak, push the black ball in and, with a cotton swab, apply a small amount of Vaseline
inside the valve.
• Keep sharp objects away from the pillow. The pillow contains a precision air-tight bladder which will cause
the pillow to fail if punctured.
11