Human Touch perfect chair pc6 Use & Care Manual page 3

get ready
UNPACK THE BOXES
Headrest frame
Chair frame
3/16-inch
Head sock Allen key
Footrest frame
INSTALLING THE FOOTREST FRAME
1. Remove the footrest frame screws
Using the Phillips-head screwdriver (provided), remove the two
screws from the footrest frame. Retain them for use in step 3.
2. Slide the footrest frame onto the chair frame
Slide the two ends of the footrest frame into the holes in the
front of the chair frame.
humantouch.com
Body pad Arm cap (2) Phillips-head
screwdriver
Head pad Ergo lumbar pillow Head pillow
4
Your Human Touch
assembly. Just attach the headrest/footrest frames, pads, arm
caps, and head pillow, and you're done!
3. Replace the footrest frame screws
Using a Phillips-head screwdriver and the two provided screws,
secure each side of the footrest frame to the chair frame.
4. Attach the canvas to the footrest frame
Using both hands, gently pull the seat canvas forward just to
the top of the footrest frame, then secure the two flaps located
underneath the canvas to the footrest frame.
5. Finish securing the canvas to the frame.
Using both hands, continue to pull the seat canvas all the way
forward to cover the footrest frame, then secure the two front
and two side flaps, using the hook and loop fasteners.
ATTACH THE BODY PAD
1. Slide the body pad onto the chair frame
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
2. Secure the body pad
Smooth the body pad into place, from the footrest toward the
backrest. The pad is automatically secured using the hook and
loop fasteners.
Perfect Chair requires some simple
® ®
5 5