Human Touch perfect chair pc6 Use & Care Manual page 5

take a seat
1. Adjust the recline angle
To recline, gently pull up on the recline lever, lean back on the backrest to adjust it to the desired angle,
then release the lever. To incline to a more upright position, gently pull up on the recline lever, then pull
up on the armrests with your hands while applying slight downward pressure with your elbows, until the
backrest inclines to the desired position. Release the recline lever.
When adjusting the footrest up and down, you may notice a slight bumping sensation.
This is caused by the footrest locking mechanism, and is perfectly normal.
humantouch.com
8
Using your Human Touch Perfect Chair
seat and adjust the chair to the desired position. The Perfect
Chair cradles you in zero-gravity comfort, with your feet above
your heart—the ultimate neutral-posture position for back and
spine relief.
3. Adjust the headrest
While seated, reach up with both hands and grasp both sides of
the headrest. You will feel the rigid frame beneath the soft head
pad. Grasping the rigid frame, tilt the headrest forward or back-
ward for maximum comfort. The headrest remains in this position
until you adjust it again.
4. Getting out of the perfect chair
Gently pull up on the recline lever, pull up on the armrests with your hands while applying slight downward
pressure with your elbows, until the backrest inclines to a full upright position. Release the recline lever.
Use the arms for support when getting up from the chair.
CAUTION: Do not put any extra pressure on the footrest while returning the chair to an upright position.
Do not push on the footrest, or lean against it.
9
is easy. Just take a