Important Information - DURAVIT Nahho Mounting Instructions

Important information

Regarding the mounting instructions
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Explanation of the key words and symbols
ADVICE! For avoiding property damage
Link to installation information in this section
Inspection (e.g. for scratches)
Inspect to check for leaks and tightness
Indication of the length of time (e.g. 10 minutes)
Target group and qualification
The bathtub must only be installed by trained plumbing
engineers.
NOTE!
Local installation regulations and any country-specific
standards must be observed at all times.
Installation information
Please read pre-installation datasheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.
NOTE!
Australia/New Zealand:
accessories do not have Watermark or Wels approval for
installation. Please replace with approved alternative (not
included).
28 53
Installing tap unit (Diagram 28 and 53)
+
> The installation of the tap unit is described
in separate instructions and these should be
observed during the installation.
29
Installing the flush inlet (Diagram 29)
> The installation of the flush inlet is described
in separate instructions and these should be
observed during the installation.
59
Maintenance (Diagram 59)
> The maintenance panel must be accessible and
removable for maintenance.
Taps, valves and shower
BA_M_Nahho_angeformte_Verkleidung/16.05.5
5