SATA 62702 User Manual page 12

Note:
1）Do not use this tester to check a voltage that is lower than 12 VAC orhigher than 1,000 VAC.
Never use the tester to check DC voltage.
2）If there are several conductors close to each other （ 2-phase or 3-phase lines） , before test of
each conductor, adjacent conductors shall be separated from each other with a proper distance
to avoid interference.
3）Due to its limited capability and the influencing factors, such as sensitivity and test distance, no
beeping from the tester does not ensure there is no current running through the object under
test. To avoid electric shock, do not have your hand or skin contact with any conductor.
4）When the tester is interfered by an adjacent electric field, it may beep even there is actually no
current running though the object under test. To avoid interference and obtaining a wrong result,
do not use this tester near a strong electric field.
5）If the tester is damaged or does not function well, do not use it.
6）Do not use the tester to test a shielded conductor.
Note:
1）Our company reserves the right to make any modification to this manual.
2）Our company does not bear any liability for other losses resulting from the use of the tester.
3）This manual or any part of it shall not be considered as the basis for product application for
special purposes.
12
62702
中文
EN DE
Battery
RU KO PT JA ES
Figure 2