SATA 62702A User Manual

62702A
3. Operation
- ON/OFF detector
A. ON: press the power switch, the indicator light is bright, test detector
will be self-checking, flashlight, expanding induced voltage signal light
sensitivity, flickering lights, etc. Once a buzzer sound.
B. OFF: press the power switch again under the power on module.
- ON/OFF the flashlight
A. ON: press the flashlight button once time under the power on module.
B. OFF: press the flashlight button once time under the on module of
flashlight.
- AC voltage detection
During the ON status of tester detector, insert the test pin into power
socket or near the live conductor, the Indicator light will be flashing
along with different buzzer warning.
The different indicator light compare with different current intensity as
below:
Current intensity Indicator light
LOW Green on
MIDDLE Yellow on
HIGH Red on
- How to judge the N/L of electrical wires
Put the test detector near the separated electrical wires, or insert the
detector into the power socket, according to different test objection,
the indicated signal of N will be zero or lower or no , and the indicated
signal of L will be higher.
- AC voltage detection Range
A. During the on status of test detector, the default detect voltage range
is 48-1000V
B. Press S (open sensitivity extension function), the detect voltage range
will be 12-1000V;
C. Press S again, The sensitivity extension function will be closed.
- Auto power-off
A. When detect no any voltage signal during 5 min, or no any operation
on test detector, it will be power off.
B. During the flashlight working on, this test detector will be power-off
around 3 min, although it detects any voltage signal or not.
- Low Battery power
When the battery power lower than 2.6V, the indicate light of power
switch will be flash 3 times, and buzzle warning once time, then power
OFF, warning to change the battery.
4
EN 62702A
4. Change the battery
- Take off the battery cover.
- Take out the battery.
- Put 2 pcs new battery into the battery holder according to the correct
+/- direction.
5. Technical Specification
Prompting Mode Sound and light
Around 12-1000V(Open S function)
Ac Voltage Detection
Range
Around 48-1000V(Close S function)
Frequency
50HZ/60HZ
Safety Level CE CAT 111 1000V/CAT 1V 600V
Power
2x1.5V AAA battery
Flashlight White lightF5LED floodlight
Auto Power-Off √
Low Power Battery √
Usage Temperature
0
Storage Temperature -10
Judge The N/L
Refer the above clause 4
Ncv Range Auto choose low, middle, high degree
Signal Intensity/
Refer the above clause 3.3
Warning Mode
Dimension
162×23×27mm
Weight About 48g (cover battery 14g)
EN
- 40
- 50
62702A
SATA Products Cloud
High-Precision Noncontact Voltage Detector
62702A
\ User's Manual
EN