Using Pc Cards - Sony VGN-B1XP Hardware Manual

Using PC Cards

Your computer features a PC Card slot that supports Type I or Type II PC Cards. PC Cards allow you to connect portable external
devices.
Inserting a PC Card
You do not need to shut down your computer when inserting a PC Card.
To insert a PC Card, proceed as follows:
1
Insert the PC Card into the PC Card slot with the front label and arrow facing upwards.
2
Gently push the PC Card slot into the connector.
The PC Card is automatically detected by your system.
The Safely Remove Hardware icon
✍
Some devices may not function properly if you repeat returning to Normal mode from Standby mode or Hibernate mode.
For some PC Cards, if you alternate between Normal power operation and Standby or Hibernate power management modes while the card is inserted, you may find that
a device connected to your system is not recognised. Restart your system to correct the problem.
Make sure you use the most recent software driver provided by the PC Card manufacturer.
If an "!" mark appears on the Device Manager tab in the System Properties dialog box, remove the software driver and then reinstall it.
You do not need to shut down the computer before inserting or removing a PC Card.
Do not force a PC Card into the slot as it may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC Card in the correct
direction. See the manual supplied with your PC Card for more information on use.
appears in the system tray.
n N
38
Using your VAIO computer