Table of Contents
Advertisement
OPERATION
1.POWER LEVELS
Eleven power levels are available.
The power level is automatically set at PL10, but you can change it for more flexibility.
Prior to or during cooking, touch Power and "PL10" will display. Then touch Power
repeatedly until the number you wish appears in the display.
Power levels can be adjusted by touching number pads.
If you wish to know power level in cooking state of microwave, simply touch Power,
the current power level will be displayed for 3 seconds.
Level
Power
Display
2.CLOCK SETTING
When the microwave oven is plugged into an outlet, "0:00" will display.
Oven into standby mode.
1). Touch Clock once, "00:00" will appear in the display.
2). Touch the number pads to enter the current clock time. For example, if the time is
now 10:12, enter the correct time of day by touching the numbers" 1, 0, 1, 2 " in
sequence.
3). Touch Clock to finish clock setting, " : " will flash and the numbers will appear as
a clock time in the display.
• If the numbers entered are not within the range between 1:00 to
12:59, the setting will not be accepted until valid numbers are
entered.
NOTE
• In the process of setting clock, if the
there is no operation within 1 minute, the display will
automatically return to the previous clock setting.
11
10
9
100%
90%
80%
PL10
PL9
PL8
EN-18
INSTRUCTION FOR USE
3
......
20%
10%
PL2
PL1
pad is touched or if
2
1
0
PL0
Advertisement
Table of Contents
