Leica RINEX AgChem SP AutoSPRAY B Installation Manual page 2

INTRODUCTION
The AgChem Self Propelled AutoSPRAY Cable B, optional cable, (Part
No: 1-2817) is designed to suit the following installations:
Compatible Vehicles
Rogator 1254 Rogator 1264 Rogator 1274
The cable will detect the status of the Master Switch and control the
seventh section of the boom if installed, but only if Cable A (Part
No 1-2816) is already installed.
The AgChem SP AutoSPRAY Cable A (Part No 1-2816) will control up
to six individual boom sections; it does not detect the status of the
Master Switch in the installation.
Figure 1: Cable A
Figure 2: Cable B
(Part No 1-2816)
(Part No 1-2817)
1-1267 Rev A AgChem SP AutoSPRAY Cable B Installation Page 1