Sony VAIO PCG-SR31K User Manual page 51

Connecting peripheral devices
Connecting a computer display
Use the supplied display adapter to connect your external display to the computer.
When you connect an external display to the monitor connector, you can press <Fn>+<F7> to toggle the
output between the Liquid Crystal Display (LCD), the external monitor or both devices.
You may not be able to display the computer's LCD and the external display together, depending on the
type of computer display and projector used.
To connect a computer display, proceed as follows:
1 Plug the supplied display adapter (1) into the computer's monitor connector (2) and the display cable (3)
into the display adapter.
2 If necessary, plug one end of the display's power cord (4) into the display, and the other end into an AC
outlet.
✍
To remove the display adapter, first turn off the computer, then press both sides of the display adapter connector and unplug it from the computer.
n N
51