Sony VAIO PCG-R600MX User Manual page 29

Using your notebook
Combinations and functions with the <Fn> key
Combinations/ Feature
<Fn> +
<Fn> +
<Fn> +
<Fn> +
<Fn> +
external display
<Fn> +
* First you need to connect your external display, then you turn on your notebook. When you connect your external display when the
computer is already on, you cannot use the key combination <Fn>+<F7>.
* This function can only be used by the first user to log in. It will not work if you have switched to another user account.


Some functions are not available until Windows
Functions
Puts the system into Standby mode, a power management state. To
return the system to the active state, press any key.
(ESC): Standby
Toggles the built-in speaker on and off.
(F3): speaker switch
Adjusts the built-in speaker volume.
(F4): speaker volume
To increase volume, press <Fn>+<F4> and then
To decrease volume, press <Fn>+<F4> and then
Adjusts the brightness of the LCD.
(F5): brightness control
To increase lightness intensity, press <Fn>+<F5> and then
To decrease light intensity, press <Fn>+<F5> and then
Toggles between the LCD, external display (connected to the monitor
connector) and both LCD and external display.
/ (F7)*: switch to the
Provides for the lowest level of power consumption. When you
execute this command, the states of the system and of the peripheral
(F12): Hibernate
devices are written to the hard disk and the system power is turned
off. To return the system to its original state, use the power switch to
turn on the power.
®
is launched.
or
or
or
or
n N
28