Table of Contents
Advertisement
Getting help
About the docking station
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM drive in the docking station connected to the
notebook
To switch on the i.LINK™ network switch, proceed as follows :
1
Disconnect your notebook from the docking station.
2
Disconnect the AC adapter and all cables from the docking station if necessary.
3
Set the i.LINK™ network switch on the bottom of the docking station to the unmarked side with a thin
pen tip.
4
Connect the docking station to your notebook.
5
Turn on your notebook.
You can now operate the CD-RW/DVD-ROM drive or the DVD-ROM drive.
✍
Do not set the i.LINK™ network switch when the notebook is on. It causes malfunction.
Set the i.LINK™ network switch after removing all cables connected to the docking station.
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM in the docking station connected to the
notebook when the notebook is connected to another computer by means of an i.LINK™ cable
Set the i.LINK™ network switch on the bottom of the docking station to the On position.
I cannot remove the disc inserted in the drive
You cannot remove discs when the computer is in a power saving mode. Return to normal mode and then
press the eject button.
When I disconnect the docking station, a warning message appears
Close all open applications and disconnect the peripheral devices, then disconnect the docking station by
following the procedure in Disconnecting your computer from the docking station
n N
98
(page
64).
Advertisement
Table of Contents
