Aborting The System Recovery Process - Sony VAIO PCG-R600HMP Software Manual

Using the product recovery CD-ROMs
n N
100

Aborting the system recovery process

Before the actual recovery process begins, the VAIO System Recovery Utility makes it easy to cancel any
settings you may have made. Most screens remind you about the loss of data that will incur and you can
either to go back to the previous screen (press Back), or abort the recovery setup altogether. To abort,
remove the recovery CD, press Cancel, and click Yes to confirm.
However, once the recovery process has started, cancelling the job will delete all the current data on your C:
drive. If you have made changes to the partition settings, you will lose all data on both hard drive partitions.
✍
If you do not remove the CD before pressing Cancel, the system recovery will start again.