Table of Contents
Advertisement
Using Video software
To capture pictures, proceed as follows:
1
Connect the DV device to your computer.
2
Launch DVgate Still (Start/Programs/DVgate/DVgate Still).
The DVgate Still window appears.
3
Set the DV device to the Play or Pause mode.
The video image appears in the Monitor window.
4
Click the Capture button.
The video image in the Monitor window is being captured.
Dragging the slider in the Capture window to the left or right lets you display the still
picture before or after the current one.
!
If you exit DVgate Still without saving the captured still picture, it is cleared.
!
Even if you attempt to capture continuous pictures, you may not be able to capture some
frames. In this case, exit all applications other than DVgate Still and then retry to capture
them.
n N
26
Advertisement
Table of Contents
