Connecting peripheral devices
When you use Smart Connect to connect two VAIO computers, you must assign each computer a unique name by which it can be identified when the
two computers are networked.
Do not set the i.LINK
Set the i.LINK
When using Smart Connect, do not connect or remove the docking station: Smart Connect may become unavailable.
Set the i.LINK
TM
network switch on the docking station when the notebook is on. It causes malfunction.
TM
network switch on the docking station after removing all cables connected to the docking station.
TM
network switch to the off position once you have finished exchanging data.
n N
68