Maintenance Technical Instructions - Polaris Easy Cast Instruction Manual

If a user detects any defects or problems on the device, he/she should place a
warning sign on the device to indicate that it is being maintained and it should
not be used (EC warning signs can be purchased at the associated stores).
Cleaning, periodic maintenance and appropriate use of the device are important
factors in lifetime and safety of it.
It is forbidden to use the device before solving the defect which has
occurred.

Maintenance technical instructions

1.Check the water inside the tank at least every three months.
2.Check the cooling water connections and hoses for signs of breakage or tear.
3.Make sure the water pump functions properly.
4.Do not apply any mechanical pressure or damage the spring copper coil.
Avoid changing the spacing of the coil (coil pitch).
5.Discharge the tank water before transporting the machine.
6.Do not allow unauthorized personnel to repair or operate the product.
For changing fuses, follow this procedure:
-Open the gate on the body of the machine. At the front part, there are two 20 A
fuses. Change them as shown in Fig. 6. There is another 10 A fuse at the lower
part of the machine where electronic boards are fitted. You can change these
fuses as shown in Fig. 7.
Easy cast
Casting Machine
35