Table of Contents
Advertisement
Using your notebook
5
Enter a name in the Profile Name field and choose Access Point in the Network Type drop-down box.
6
Click Next.
7
Enter your network name in the Network Name text box if you know it or click Scan to find an
available access point.
If you clicked Scan, the Scan for Network Names dialog box appears. Click the appropriate Access
Point and click the OK button.
8
Select the Enable data security check box in the Set Security area if the access point was set up with
an encryption key, and select either alphanumeric characters or hexadecimal, depending on your
encryption key.
9
Fill in the Network key. Type your key (5 last digits of the access point name) in the first box, and make
sure Key 1 is selected near the bottom of the dialog box. If you wish to select another key number, select
it in the Encrypt data with drop-down box.
10
Click Next.
11
In the Power Management area, select the Off check box if you wish to keep the default power
consumption and high performance or select the On check box to lower the power consumption.
12
Click Next.
13
In the TCP/IP Behavior area, select the Renew IP Address when selecting this profile check box.
14
Click Finish.
15
Click OK in the Add/Edit Configuration Profile dialog box.
After 30 seconds, the connection is established.
n N
52
Advertisement
Table of Contents
