CANGAROO FOCUS User Manual page 16

Frequency
Transmit power
Transmission rate
Size of the LCD screen of the parent
unit
LCD Screen resolution
Communication range
Two – way communication option
Operating temperature
1 - LCD display; 2 - Audio light indicator; 3 - Unit ON/OFF light indicator; 4 - Hang hole; 5 - Night light key; 6 - Power On/Off
key; 7, 8, 10 and 11 – Buttons for adjusting the different menu functions or the movement of the camera to the left/
right/ up and down; 9 - Confirm key (OK); 12 - Talk key; 13 - Short cut key; 14 - Menu key; 15 - Microphone; 16 - Speaker;
17 - Stand; 18 - Antenna; 19 - USB socket; 20 - Power light indicator.
1. Light sensor; 2. Camera lens; 3. Infrared LEDs; 4. Microphone; 5. Power ON/OFF switch; 6. Night light; 7. Temperature
sensor; 8. Wall Mount hole; 9. Pair key; 10. Antenna; 11. Speaker; 12. Unit ON/OFF indicator; 13. DC adaptor socket.
Input: AC100-240V/ 50-60Hz 0.2A ; Output: DC5V, 1A. 5.0W
The AC Adaptor is low voltage power source. Connect the AC Adaptor to the Camera. Afterwards plug into your home's
mains electrical outlet. The plug is used to connect the device with the mains grid, the device shall remain easily
reachable. CAUTION: The charger and the supply cord are with a specifically designed for this product. They cannot be
used with any other appliance. Never use different type of adaptor or supply cord with this Baby Monitor, which are not
supplied by the manufacturer/ importer.
 WARNING! Charge the receiver completely for 8 hours before first use of the product.
1.ON/ OFF button on the camera (baby unit): Place the button in ON position and the light indicator will turn on. Turn off
the camera from the button, and the light indicator will turn off.
2.Turning on or off the receiver (parent unit): Hold the ON/OFF button for 2 seconds to turn on or off the receiver. When
the units pair successfully, you will see real-time image on the parent unit. If they have not connected with each other
successfully a "NO SIGNAL" will be displayed on the screen and alert will sound.
3.Connecting the camera with the receiver (the parent unit): The parent unit can be connected to 4 different cameras
from the same model.
•Press the MENU key on the receiver. After that press the left or right button (&), until you reach the camera icon..
The icon for cam1, cam 2, cam 3, cam4 will be displayed on the screen. Press the up and down (▲&▼), in order to
choose the camera you need. Press key ОК, to confirm. You will see „*" after the camera icon („cam 1 *"). After that press
and hold the PAIR on the camera (baby unit) button for 3 seconds. The baby unit and the parent unit will connect and
real-time image will be displayed from the camera you have chosen.
•Another way to connect the chosen camera to the parent unit. Press and hold the PAID button, on the bottom of the
camera you will find it, for about 3 seconds. The on/ off indicator will start flashing. After that, select the preferred
camera and press OK key on the parent unit (the step is same as above). The receiver will connect to the transmitter (the
camera) and a real time image will be displayed from the selected camera.
2.4000 ~ 2.4835GHz
≤20dBm
>15 films/ second
3.5" color LCD
320x240 Pixel
≥300m (in open area)
Have
0 ~ 45°C
PARTS OF THE PARENT UNIT (Figure 1)
PARTS OF THE BABY UNIT (Figure 2)
ADAPTOR
USE OF THE PRODUCT
15