Download Print this page

Dyconn GDABS-CH Manual

Garbage disposal push button

Advertisement

Quick Links

Advertisement

loading
Need help?

Need help?

Do you have a question about the GDABS-CH and is the answer not in the manual?

Questions and answers

Summary of Contents for Dyconn GDABS-CH

  • Page 3 IMPORTANT Always operate this product from a power source of the same voltage, frequency and rating. Do NOT operate this product if the power cord is damaged, or if the product appears damaged in any manner. Do NOT immerse or expose any part of this product to any liquid or expose its electrical components to excessive moisture.
  • Page 4 Please note the Dyconn Faucet Garbage Disposal Push Button assembly can be easily removed and re-installed for personal customization. Other attractive Push Button faucet.com/index.php/wheretobuy for a list of Dyconn Faucet resellers.
  • Page 5: Push Button

    A. Mount the Push Button through a standard countertop hole. Make sure the attached rubber gasket is installed between the countertop and the push granted the hole is 1-1/4” in diameter. If installation of a hole for the Push Button is required, simply drill a 1-1/4” diameter hole through the countertop.
  • Page 6: Air Tubing

    A. Firmly push and install one end of the air tubing into the female connector, located on the bottom of the push button. Push Button Air Tubing B. Measure the distance from the push button to the dedicated location where the Push Button Power Wall Adapter will be installed .
  • Page 7 A. Use the 4 screws and insert them into the screw ports on the Push Button Power Adapter. Screw the 4 screws into a designated wall surface, securing the power adapter in place. AC outlet. AC Wall Outlet Wall Adapter Power Cord www.dyconnfaucet.com...
  • Page 8: Power Adapter

    A. Plug the garbage disposal power cord into the Push Button Power Wall Adapter. Garbage Power Adapter Disposal the Push Button Power Wall Adapter. Push the Push Button once to stop the garbage disposal. www.dyconnfaucet.com...
  • Page 9 Installation Assembly Diagram The illustration below represents the typical installation assembly. Push Button Wall Outlet Power Adapter Garbage Disposal blade compartment, or should cleaning of the garbage disposal be desired, immediately unplug the garbage disposal power cord from the Push Button Power Wall Adapter.
  • Page 10 Operating the Push Button A. Press and release the Push Button to turn On garbage disposal. Press/Release Button www.dyconnfaucet.com...
  • Page 11 In any case, Dyconn Faucet is not liable for any amount over and above the purchase price paid for the Product by the original owner/end-user.

This manual is also suitable for:

Gdabs-orbGdabs-bn