1.2. Unpacking Please verify that the product is complete and without any damage. The following items must be included: • K315U – Frequency Output & MIN Alarm KIT for Ultra Low Flow Sensor with PVC plate included • Instruction Manual 2.
Local Status Indicator: GREEN Led = Flow RED Led = No Flow Enclosure: IP65 Operating temperature: 0 to 60°C (32 to 140°F) Relative humidity: 0 to 95% non-condensing Housing material: PVC Standards & Approvals Manufactured under ISO 9002 3.2. Dimensions K315 KIT K315U – Frequency Output & MIN Alarm...
ULF3.15 Sensor with O.C. output & MIN alarm . Installation 4.1. Sensor Assembly crew down completely the sensor onto the PVC plate and connect electric cables according to specifications. K315U – Frequency Output & MIN Alarm...
Remove the up per part of the terminals for an easy cabling. Insert wire tip or ferrule completely into the terminal and fix with the screw until finger tight Sensor Wiring Diagram Power Wiring Diagram K315U – Frequency Output & MIN Alarm...
Page 6
The FlowX3 monitor does not provide power supply to the K315U KIT. External power supply is required. onnection to a PLC with built-in power supply onnection to a PLC/Instrument with separate power supply K315U – Frequency Output & MIN Alarm...
• OFF position to sele ct the 3 second switch delay • ON position to select the 10 seconds switch delay The electronics recognise switch 2 modification after te n seconds. K315U – Frequency Output & MIN Alarm...
N output sig rify : • • Power supply (sec. 4.2. Wiring) Incorrect handling of O.C. • Conn output ections between K315U and • Incorrect cabling other electronic devices (sec. 4.2. Wiring) The roto r doesn’t turn • • Wire insertions into in term inal holes (sec.