Table of Contents
Advertisement
5.
Maintenance and Safety Inspection
1)
Visually inspect the surface of the probe head, the housing,
the cable and the connector for any crack, scratch or
denaturalization. If you find any damage, do not use the probe,
and immediately contact a service support.
2)
Inspect the functionality of Real-time 3D mode. If you find
abnormalities such as abnormal noise, do not use the probe,
and contact immediately a service support.
3)
After using the probe, the probe should be cleaned and
disinfected according to "4. Reprocessing Procedure", store the
probe in a cool and dark space to avoid high temperature,
humidity and direct sunlight.
-13-
Q1E-EP1398
Advertisement
Table of Contents
