Table of Contents
Advertisement
6.
Maintenance and Safety Inspection
1)
After using the probe, the probe should be cleaned and
disinfected and/or sterilized according to "5. Reprocessing
Procedure", store the probe in a cool and dark space to avoid
high temperature, humidity and direct sunlight.
2)
After using the magnetic sensor attachment, the spacer for
EZU-RV2S and the elasto coupler, it should be cleaned and
disinfected and/or sterilized according to "5. Reprocessing
Procedure", store the magnetic sensor attachment, the spacer
for EZU-RV2S and the elasto coupler in a cool and dark space
to avoid high temperature, humidity and direct sunlight.
3)
Visually inspect the surface of the probe head, the housing,
the cable and the connector for any crack, scratch or
denaturalization. If you find any damage, do not use the probe,
and immediately contact a service support.
4)
Visually inspect the surface of the magnetic sensor attachment,
the spacer for EZU-RV2S and the elasto coupler for any crack,
deformation or denaturalization. If you find any damage, do
not use them, and immediately contact a service support.
-24-
Q1E-EP1041
Advertisement
Table of Contents
