Removing A Pc Card - Sony VAIO PCG-FX101 User Manual

Using your notebook

Removing a PC Card

Follow the steps below to remove the PC card while your computer is on. If it is not removed properly, your
system may not work properly. When your computer is off, skip steps 1 to 7.
To remove a PC Card, proceed as follows:
1 Double-click the Unplug or Eject Hardware icon in the taskbar.
The dialog box Unplug or Eject hardware appears.
2 Select the hardware you want to unplug.
3 Click Stop.
4 In the Stop a Hardware device dialog box, confirm that the device can be safely removed from the
system.
5 Click OK.
You get the message that it is safe to remove the device.
6 Click OK.
7 Click Close.
8 Press the PC Card release button so that it pops out.
9 Push the PC Card release button to eject the card.
10 Gently grasp the card and pull it out.
11 If the PC Card release button is still out, push the PC Card release button in the notebook.


If you unplug the PC Card from the computer when this is still turned on, your system might crash and you might lose data that you did not save before.
Before you remove the PC Card, click the PC Card icon in the taskbar and close the card. Close any applications that use the PC Card before removing
the card. Otherwise, data may be lost.
While the card is inserted, your computer may not enter the Hibernate power management mode. It may enter Standby mode. It is recommended
to remove the card when your computer enters Hibernate mode by pressing <Fn> + <F12> keys or by using the PowerPanel Utility, and when it is
set to enter Hibernate automatically while using a battery as the source of power.
You may not be able to use some PC Cards or some functions within the PC Card with this computer.
n N
46