1. Manuals
  2. Brands
  3. XtremepowerUS Manuals
  4. Swimming Pool Cleaners
  5. 75051
  6. Owner's manual and safety instructions

XtremepowerUS 75051 Owner's Manual And Safety Instructions

2-wheel suction pool cleaner
Hide thumbs

Advertisement

Table of Contents

OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 75051 and is the answer not in the manual?

Questions and answers

Related Manuals for XtremepowerUS 75051

Summary of Contents for XtremepowerUS 75051

  • Page 1 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER). FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST...

  • Page 2: Safety Information

    SAFETY INFORMATION & SAFETY INSTRUCTIONS: Read Prior to Use SUCTION AND DROWNING RISKS If your pool is equipped with one, you cover your dedicated suction port/vac port/ automatic MUST pool cleaner port when not in use by the cleaner. allow anyone, especially children, to use or play with or around the cleaner or hose. Educate DO NOT the pool users about the dangers of the hose, cleaner, and suction ports.

  • Page 3: Prior To Installation

    PRIOR TO INSTALLATION Carefully read and follow all instructions contained in this operating manual. Failure to do so may cause injury, inhibit the operation of the pool cleaner, or damage your pool. The manufacturer disclaims any liability for repairs or replacements to any structures or components in the customer's pool.

  • Page 4: Step 1: Check Contents

    INSTALLING YOUR POOL CLEANER Your Pool Cleaner is fully assembled, making installation quick and simple. STEP 1: CHECK CONTENTS Remove the cleaner body and all accessories from the box and check the contents. Refer to Figure 1. Description Quantity Head Cleaner Hose Lengths Leader Hose Flow Gauge...
  • Page 5 INSTALLING YOUR POOL CLEANER STEP 2: CONNECT HOSES AND HOSE FLOAT b y pushing the male (smaller) Assemble into the female (larger) as shown in Hose Sections Hose Cuff Hose Cuff Figure 2. Figure2 FEMALE HOSE END MALE HOSE END 2.
  • Page 6 INSTALLING YOUR POOL CLEANER Add the 2 to the cleaner: Hose Floats • 1st Hose Float-About 12"from Articulating Swivel(at top of Leader Hose) • 2nd Float-About 9" past the first float Hose Figure4 4. Next, connect sufficient lengths of hose to cover the distance from the pool skimmer or vacuum point to the farthest point of your pool.

  • Page 7: Step 3: Installation

    INSTALLING YOUR POOL CLEANER STEP 3: INSTALLATION WHEN CONNECTING TO THE POOL SKIMMER When connecting to the pool skimmer, the must be used. The ensures your Flow Control Valve Flow Control Valve receives the flow required for optimum performance (see Figure 6). Compass Pool Cleaner 1.
  • Page 8 INSTALLING YOUR POOL CLEANER WHEN CONNECTING TO A DEDICATED VACUUM LINE IN THE POOL Some pools are equipped with a dedicated vacuum line, which allows the cleaner to be connected to this line. In such cases, the Flow Control Valve should NOT BE USED. To connect to the dedicated vacuum line: 1.

  • Page 9: Routine Maintenance

    INSTALLING YOUR POOL CLEANER Figure 7 CI i mb Ground a. If you are connected to the skimmer, first remove the cleaner in the end of the hose, then inserted the flowmeter little head end of hose, after being flow stability, observe whether the meter dial is in an area where you need to, if not you need area, adjust the flow control valve spring gear.make meter dial in the area, you need choose good area after cleaning, remove the flowmeter, remounted cleaner.
  • Page 10 CARING FOR YOUR POOL CLEANER IF CLEANER STOPS RUNNING 1. Make sure the pool pump is off. Remove the Pool Cleaner from the pool and disconnect the cleaner from the hose. 2. If you try to rotate the wheels and they don't move, check if anything is clogged inside the cleaner. To open: a.
  • Page 11 CARING FOR YOUR POOL CLEANER ADJUST THE TIRE BUMPER HEIGHT IF YOU NEED TO If the user wants to focus on cleaning the pool wall, after adjusting the flow through the cleaner according to the pool wall area marked by the flowmeter (see the tip on page 9), the bumper on the tire can be cut off according to the position of the secant groove, so that the machine tire can gain more friction and prevent slipping (see figure 9 ) .

  • Page 12: Troubleshooting

    TROUBLESHOOTING Due to the individual characteristics of your pool, some adjustment may be required to get the best performance from your Pool Cleaner. The following tips will help you to optimize its performance. Problem Solution Cleaner does not move, or Make sure the main drain is closed.
  • Page 13 TROUBLESHOOTING Problem Solution Check the hose to ensure there are no leaks. Air bubbles can be seen Check the connection of the Flow Control Valve to make sure it is under in the flow from the Check that pump basket lid is fitted correctly, is not loose or cracked and that no 0-rings are worn or missing.

  • Page 14: Please Read The Following Carefully

    DISCLAIMER PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

Table of Contents